AWWA Standard C210-03 (Revision of C210-97): Standard for Liquid-Epoxy Coating Systems for the Interior and Exterior Water Pipelines

$67.00
Current Stock:
SKU:
AWWA C210
SUBTITLE:
ISBN-10 DIGIT:
ISBN-13 DIGIT:
STANDARD NUMBER:
AUTHOR-1:
American Water Works Association
AUTHOR-2:
AUTHOR-3:
AUTHOR-4:
AUTHOR-5:
PUBLISHER-1:
PUBLISHER-2:
PUBLISHER ACRONYM:
DISTRIBUTOR:
SUBJECT/CATEGORY-4:
COPYRIGHT/PUBLICATION DATE:
2003
BINDING:
Paperback
EDITION NUMBER:
SERIES:
PAGE COUNT:
13
LAST UPDATE (DATE):

Available Formats required
This standard sets minimum requirements for shop- and field-applied, liquid-epoxy interior linings and exterior coatings used in the potable-water-supply industry for steel water pipelines installed underground or underwater, under normal construction conditions. Major changes made to the standard in this revision include the following: physical and performance requirements have been divided into two separate tables; replaced v-cut adhesion test with ASTM D3359 (Method A); Sec. 4.4.2.6, Surface Inspection, was revised; Sec. 4.4.3.6, Cure, was revised; Sec. 5.1, Inspection, was revised; Sec. 5.2, Performance Testing of Laboratory-Applied Epoxy Coating System, was added; and, Sec. 6.3, Affidavit of Compliance, was revised.